New LED Stadium Lighting Series Delivers 180LM/W Output and Broadcast Grade Flicker Control
October 31, 2026
New LED Stadium Lighting Series Delivers 180LM/W Output and Broadcast Grade Flicker Control
Fins board has released a new LED stadium lighting series built for competition venues that run evening fixtures, televised matches and community hire from the same pole grid. The range delivers up to 180 lumens per watt with driver ripple held below one percent, so high frame rate replay cameras record without banding while the venue cuts connected load against legacy metal halide installations.
The series covers 300W to 1800W in a shared die-cast aluminium housing, with asymmetric optics supplied in three beam variants for four, six and eight pole layouts. Photometric files are measured on a 21 by 15 point grid, which allows lighting designers to prove uniformity above 0.7 and controlled gradient values before poles are ordered. Contractors receive aiming schedules and IEC photometry with each shipment, cutting commissioning time on site.
Thermal design targets 45 degrees Celsius ambient, a specification drawn from client projects in the Middle East, Southeast Asia and the southern United States. A pressure equalising vent, silicone gaskets and a sealed driver compartment hold the IP66 rating through salt spray and thermal cycling, while an integrated surge module rated to 20kV protects electronics on exposed masts with unstable supply.
Delivery is structured for project schedules rather than stock orders: fixtures ship with aiming schedules, wiring diagrams and photometric files in one document pack, and spare driver modules can be added to the same shipment so maintenance stores are stocked before handover. For retrofit projects the company supplies a lighting model of the existing pole grid, allowing the client to confirm uniformity and illuminance targets on paper before committing to a purchase order.
Series Specifications
| Parameter | Detail |
|---|---|
| Power range | 300W to 1800W in a shared housing family |
| Luminous efficacy | Up to 180LM/W at 5700K |
| Flicker | Below 1 percent ripple for 1000fps recording |
| Optics | Asymmetric T2 and T3, three beam variants |
| Ingress protection | IP66 with pressure equalising vent |
| Surge protection | 10kV to 20kV depending on model |
| Lifespan | 100000 hours L90B10 |
| Warranty | 5 years with spare drivers in stock |
Highlights For Venue Owners
- Roughly fifty percent lower connected load against equivalent metal halide systems
- Curfew dimming profiles that reduce output after published closing hours
- Single spare part family across the wattage range
- Documented photometry ready for federation inspection files
- Colour consistency within three MacAdam steps across a batch
Samples and photometric files are available for lighting designers and stadium contractors evaluating the range. The series is produced at the company manufacturing base in Guangdong under ISO 9001 control with CE, RoHS, FCC, PSE and UL recognised components.
About the manufacturer: Fins board and BOCAQ branded lighting products are produced in Guangdong, China, by a team focused on outdoor and hazardous area luminaires for contractors, distributors and engineering firms. The company supports projects with measured photometric files, structural load data, certification documentation and spare part programmes, and it exports across North America, Europe, the Middle East and Southeast Asia through a distributor and project channel model.